How to unlock iPhone 3GS Newboot on iOS 6.1.6

For those of you who upgraded to iOS 6.1.6 but forgot to save the SHSH file for it, you’ll not be able to untethered jailbreak the device and unlock your iPhone. Therefore, you can only be running on 4.1 or 6.1.6 only. Currently, there are no tools to create an iOS 6.1.6 Custom Firmware. So if you want to update to 6.1.6 then just restore the original firmware using iTunes.

What is the benefit of unlocking an iPhone? You can start using a sim card from any cell phone carrier right away once your iPhone is unlocked. This is extremely helpful for those that have to travel to a different country or just want to use a different carrier than their original one.

How to Unlock iPhone 3GS on iOS 6.1.6 using Redsn0w

Step 1: Download Redsnow 0.9.15b3 and unzip it

Step 2: Once the software is launched, click on the “Extras” button

Step 3: Download iOS 6.1.6 and click Select IPSW > Choose the firmware > Click Yes (if your device is 3gs oldboot, then click No).

redsn0w-iphone

newboot-oldboot

Step 4: Now go back to the main menu, select “Jailbreak” > give a check on install cydia and Install iPad baseband (the purpose is to get Baseband 6.15) > Next.

install-cydia

Note: When selecting Install iPad baseband, Redsn0w will ask you a Yes or No question, just select Yes.

Step 5: Turn off the device, put it into DFU mode and wait for the jailbreak process to be completed. If you still not see the Cydia icon on your Springboard, make sure to do a quick “Just boot”.

Step 5: Now go to Cydia and let it reload data and upgrade everything, then go ahead and install a utility called ultrasn0w.

Step 6: Still on the same Redsn0w, choose Extras > Select IPSW > click on the original iOS 6.0 firmware > Click No

Step 7: Repeat step 4 and 5, then you’re done. You have successfully downgrade from Baseband 6.15 to 5.13. Enjoy!

restore-ipsw-ios6

Did you know that you can also use a Cydia tweak called UltraSn0w to unlock the phone? We will also include a guide on that below.

How to Unlock iPhone 3GS with UltraSn0w

  1. Jailbreak your iPhone, obviously
  2. Open up Cydia and wait for it to reload
  3. Search for UltraSn0w and Install it
  4. If you can’t find the tweak, add the following repo: repo666.ultrasn0w.com

Now restart your iPhone and that’s it! Enjoy your new unlocked smartphone.

Leave a Comment

  1. hi there
    my friend upgrade his 3gs at&t phone accidentally ios 6.1.6 and he lost unlock.
    than i tried to make what you say on this page. but when jailbreak finishes iphone gives error. on the iphone’s screen i see that
    ERROR!
    Please reboot the device into normal opration mode, then perform e clean “slide to power off”, then try again.
    if i jailbreak without instaling ipad baseband, just install cydia i can do it. but if i want to install ipad baseband it gives error. what can i do? can you help me please

    Reply
    • I’m really sorry to hear that. So you’re saying that you can jailbreak a device if you do not choose to install ipad baseband. That’s not a normal situation. Hmm! I think that you may did something wrong. Please try to put the device in DFU mode first. Let me know what happen.

      Reply
    • I had similar issues, but got around it by doing the ipad baseband and cydia installs in separate steps rather than both at the same time.

      Reply
  2. Thanks for solution. =) Thanks for solution. I updated 3GS from 6.1.3 to 6.1.6 and jailbreaked+unlocked this method. but I left the modem 6.15.

    Reply
  3. Quiero desbloquear mi iphone 3Gs tiene la version 6.1.6 baseband 06.15 le hice el jailbraek y le puse ultrasnow y no se desbloqueo que puedo hacer. y trate de downgrade la baseband pero me da error y tengo que restaurar el iphone de nuevo.

    Reply
  4. Will havr problems in the gps with the ipad baseband? When i unlocked in ios 5.1.1 had to downgrade the bb to 5.16.8 to be able to use gps. But with redsnow on ios 6.1.6 does not support this baseband.

    Reply
  5. It says it will brick radio wifi etc if I choose yes in step 4. Should I continue anyway? Cause my phone will become useless if its bricked!

    Reply
  6. My friend i have my iphoe 3gs baseband 05.16.08 and serial 88144Txxxxx, so is dangerous apply the ipad baseband. What can i do? Please help me!!!

    Reply
  7. if you are having problems, for step 3, DO NOT USE firmware OS 6.16. instead select firmware ISPW 6.0 restore.( you will have to download this firmware from before.) then follow the rest of the steps

    Reply
  8. hello ihacks blogger’s

    first I tolled to my problem I got a iphone 3gs ios 5.1.1 locked than jailbreak its with 6.0.1 ios but my iphone was activated but locked sim card than I put the ios 6.1.6 restore file on iTunes software update folder and restore it with iTunes but I still got inactivated with sim lock problem finally I jailbreak only with cydia after that process phone was activate but still sim locked than I found your ans
    I have done steps 1 with os 6.0 and other as you mention but I’m facing a new problems iphone go’s to inactivated condition and reboots problem in the and I have jailbreak iphine just with cydia now iphone is activated but searching the network please tell me what can I do plz reply me Id *deleted for privacy purposes*

    Reply
  9. Apple has just released iOS 6.0.1 and iOS 6.1 beta yesterday, the iPhone Dev Team has updated Redsn0w 0.9.15b3 yesterday and fortunately the new Redsn0w version is still able to Tethered Jailbreak iOS 6.0.1.

    Step 1: Download Redsn0w 0.9.15b3 and original iOS 6.0.

    Step 2: Connect your phone to your computer and put it into DFU mode.

    Step 3: Open RedSn0w, Click Extras> Select IPSW, and select iOS 6.0 firmware for your device.

    Step 4: Go back to the main RedSn0w screen and click on Jailbreak. RedSn0w will process, then you select Install Cydia and click Next.

    Step 5: After the jailbreak process, you have to make a Just boot for the device by going back to the main screen. Redsn0w> Extras> Just boot … put the machine back to DFU once for Redsn0w work.

    Step 6: Redsn0w automatically working you see the pineapple logo appear on the screen until the device restart, you will see Cydia on the Home screen.

    Reply

Leave a Reply to tolga solak Cancel reply

Cydia Geeks